Shimpo TNP-Series Instrukcja Użytkownika

9 Mode 1time/sec 2times/sec 8times/sec 02 4times/sec Function Mode – Display (update rate) f02 f02

10 Plus 1 by pressing Recall key Move to the right Move to the right Press Mem key scrolls back to th

11 VIII. Operation Pretest Checklist: Determine the size of the sample to be tested. Adjust the 4 jig on the testing table accordingly. Center th

12 Resetting the Peak values to Zero MEAN is real time value based on the average data captured in 1000 s

13 How to change the HI and LO values from the TNP torque meter? • To set the HI and LO limits from the TNP torque meter access the function mode.

14 XI. Zero adjustment / Tare the TNP Taring or zeroing the value of the TNP initialize the torque meter to zero. This function is performed by pr

15 XIII. How to recall stored Memory Select Open or Close Mode, press the Recall key and the display will indicate the number of data stored in me

16 Picture above indicates the memory ID followed by the stored data. Pressing the mode button anytime exits out of the memory window. Below

17 XIV. Clearing Stored Data There are two types of memory clear available on the TNP torque meter. • Single memory clear • Clear all memory

18 Here is a flowchart of how the single clear works. When there is one last data, the last data is cleared by pressing Zero/RST key. After t

1 Contents I. Introduction ...

19 XV. Sample Applications Valve Open/Close testing Cosmetic Cap Testing Beverage Cap Testing Camera Lens Zoom testing Torque Wrench applica

20 XVI.Specifications and Drawing

21 XVII.Other Shimpo Products Please check Our website for other Shimpo force and Speed Products www.shimpoinst.com Speed Products Force Product

2 I. Introduction Thank you for choosing the TNP Digital Torque Tester. With proper use and operation, this unit will provide many years of reliab

3 II. What is the TNP Torque Meter? The TNP torque meter is a portable static torque measuring device that can be used as a quality assurance tool

4 IV. Parts and Functions Parts Functions/Description Power key Turns the unit ON and OFF. Recall key Recall data stored in OP

5 V. Main Display (Description) Extended Description • Units/Status indicator – located on the upper part of the display this shows the curr

6 • Battery Indicator – shows the status of the TNP internal battery. “LO BAT” appears on the display to indicate a low battery status. “BAT” is sh

7 If the display shows the normal operation of the torque meter, and no F01 is seen on the display, the Zero/RST key was released earlier than wh

8 Operation diagram of how to access the Function Mode Turn OFF the TNP before starting Use the MODE key